BRUCHA panel WP-F
Product advantages
-
Exposed side 25 μm polyester coating with a PVC protective film (not UV-resistant - protect from direct sunlight). The film must be removed before installation or immediately afterwards.
Profile 1 - 6
Metal gauge: 0.6 mm (smaller metal gauge on request)
-
Exposed side 25 μm polyester coating with a PVC protective film (not UV-resistant - protect from direct sunlight). The film must be removed before installation or immediately afterwards.
Profile 1 (profile 2 and 3 on request)
Metal gauge: 0.6 mm (smaller metal gauge on request)
-
Structural, web-oriented mineral fibre wool
Shear resistant bond with sheet steel covers
Density approx. 120 kg/m³, 140 kg/m³ available on request
-
Tongue groove interconnect; panels interlink precisely with no thermal bridge.
-
Determined by climatic conditions inside building. Panels must be installed vapour tight. Technical installation tips are provided in the installation guidelines.
-
National and international tests, quality standards
Product
characteristics
-
- Manufacturing tolerance
- in line with EN 14509
-
- Manufacturing length
- max. 15.9 m (extra-long transport from 13.6 m)
-
- Soundproofing
- ca. 32 dB (frequency dependent)
-
- Fire behavior
- in line with EN 13501-1, Euroclass A2s1d0, non-combustible
-
- Temperature resistance
- 80 °C
-
- Overall width
- 1100 mm
-
- Special overall width
- 1000 mm
-
- Thickness
- 60 mm - 240 mm
High demands on quality and adherence to schedules make Brucha the optimal partner for us for a meticulous implementation of hall and object construction projects. Competent contact persons paired with support from the start to the end of the project result in a successful cooperation at the highest level.