BRUCHA panel WP-A
Product advantages
-
Exposed side 25 μm polyester coating with a PVC protective film (not UV-resistant - protect from direct sunlight). The film must be removed before installation or immediately afterwards.
Profile 1 - 6
Metal gauge: 0.6 mm (smaller metal gauge on request)
-
Exposed side 25 μm polyester coating with a PVC protective film (not UV-resistant - protect from direct sunlight). The film must be removed before installation or immediately afterwards.
Profile 2
Hole proportion: 32.5 %
Bore diameter: 3 mm round bore, offset
Holes: DIN RV 3-5 (R3T5) (730-000)
Metal gauge: 0.6 mm (smaller metal gauge on request)
-
Structural, web-oriented mineral fibre wool
Shear resistant bond with sheet steel covers
Density approx. 120 kg/m³, 140 kg/m³ available on request
-
Tongue groove interconnect; panels interlink precisely with no thermal bridge.
-
Due to the vapour permeable inside cover, the use as an exterior wall for wet rooms and heated buildings is only conditionally possible, or not recommended.
-
National and international tests, quality standards
Product
characteristics
-
- Manufacturing tolerance
- in line with EN 14509
-
- Manufacturing length
- max. 15.9 m (extra-long transport from 13.6 m)
-
- Soundproofing
- 33-35 dB (frequency dependent)
-
- Fire behavior
- in line with EN 13501-1, Euroclass A2s1d0, non-combustible
-
- Temperature resistance
- 80 °C
-
- Overall width
- 1100 mm
-
- Thickness
- 60 mm - 240 mm